Written answers

Tuesday, 25 April 2023

Department of Education and Skills

Apprenticeship Programmes

Photo of Mairéad FarrellMairéad Farrell (Galway West, Sinn Fein)
Link to this: Individually | In context | Oireachtas source

640. To ask the Minister for Education and Skills the reason an apprentice has not yet been called by Solas to complete their block release training; the avenues that are open to someone in such a position; and if he will make a statement on the matter. [19128/23]

Photo of Simon HarrisSimon Harris (Wicklow, Fine Gael)
Link to this: Individually | In context | Oireachtas source

Under the Further Education and Training Act (2013), SOLAS has statutory responsibility for planning, funding, and co-ordinating Further Education and Training (FET) in Ireland.

My officials have referred your query to SOLAS for direct reply on this individual matter. Solas has confirmed the individual will be called for training beginning in September 2023.

The apprentice and their employer will each receive a letter approximately 6 to 8 weeks prior to the course beginning providing them details of location they have been scheduled to.

For future queries on their apprenticeship the apprentice should contact their Training Adviser.

Photo of Mairéad FarrellMairéad Farrell (Galway West, Sinn Fein)
Link to this: Individually | In context | Oireachtas source

641. To ask the Minister for Education and Skills if he will provide the list of first-year, second-year, third-year and fourth-year apprentices that have completed the requisite on-the-job training for that year, but have yet to be called by Solas to undertake their block release training, in tabular form; and if he will make a statement on the matter. [19129/23]

Photo of Simon HarrisSimon Harris (Wicklow, Fine Gael)
Link to this: Individually | In context | Oireachtas source

Craft apprenticeship is modelled on a series of on-the-job (Phase 1, 3, 5, & 7 in the workplace) and off-the-job (Phase 2, 4, & 6 in the education or training centre) components. Apprenticeship programmes are standard based, they are not time based, so the question’s assumption of there being “first-year, second-year, third-year and fourth-year apprentices” is erroneous. For craft apprenticeship programmes, there are 7-phases. While 4 years are estimated for completion, it would be incorrect to equivocate this to the typical 4-year degree programme of a college course.

The SBA model requires an element of flexibility for the employer and for the apprentice. This allows for circumstances arising that may affect timelines, in line with employer and apprentice requirements. As a result, the time for completion of a craft apprenticeship may fluctuate throughout the lifespan of their apprenticeship and a typical waiting time between phases of 6 months is considered part of the normal cycle of the SBA apprenticeship model.

For the individual apprentice, the Covid-19 impact lengthened the apprenticeship training duration beyond the normally anticipated 4-years, considerably so in some cases. As each phase is critical to the overall training and skills development of an apprentice, being in one phase for an extended period of time cannot offset for time needed in a later phase of the apprenticeship due to competence assessment requirements.

At its peak in August 2021, there were over 11,000 apprentices waiting for their off-the-job training. Since then, there has been a major response across the craft apprenticeship system to the delays in accessing off-the-job training and significant progress achieved in the numbers waiting over six months. These stood at almost 5,000 in December and are now reduced to 4,647, notwithstanding continued strong growth in registrations throughout the year.

The number of apprentices currently on an on-the-job phasewith their employer, in tabular form, is attached.

Trade by Phase - End of March 2023
Trade Phase 1 Phase 3 Phase 5 Phase 7 Total
Construction 2441 1250 1190 620 5501
Brick and Stonelaying 63 74 54 43 234
Cabinet Making 0
Carpentry and Joinery 938 458 441 277 2114
Painting and Decorating 31 14 23 10 78
Plastering 15 25 37 7 84
Plumbing 1188 597 569 248 2602
Stonecutting and Stonemasonry 5 4 2 11
Wood Manufacturing and Finishing 201 78 66 33 378
Electrical 4958 1951 2106 932 9947
Aircraft Mechanics 49 26 53 128
Electrical 4445 1579 1885 759 8668
Electrical Instrumentation 183 112 94 41 430
Electronic Security Systems 66 66 37 17 186
Instrumentation 19 11 10 18 58
Refrigeration and Air Conditioning 245 134 54 44 477
Engineering 900 603 384 220 2107
Farriery 7 5 12
Industrial Insulation 8 20 16 44
M.A.M.F. 280 172 118 80 650
Metal Fabrication 366 233 168 86 853
Pipefitting 179 77 13 5 274
Sheet Metalworking 29 40 28 23 120
Toolmaking 38 54 41 21 154
Motor 941 599 550 332 2422
Agricultural Mechanics 49 76 43 29 197
Construction Plant Fitting 64 68 66 31 229
Heavy Vehicle Mechanics 299 120 136 62 617
Motor Mechanics 512 282 285 180 1259
Vehicle Body Repairs 17 53 20 30 120
Printing & Paper 0 0 1 0 1
Print Media 1 1
Grand Total 9240 4403 4231 2104 19978

Comments

No comments

Log in or join to post a public comment.