Written answers

Tuesday, 21 February 2023

Department of Communications, Climate Action and Environment

Energy Conservation

Photo of Paul DonnellyPaul Donnelly (Dublin West, Sinn Fein)
Link to this: Individually | In context | Oireachtas source

172. To ask the Minister for Communications, Climate Action and Environment if he will clarify that the Sustainable Energy Authority of Ireland is grant-aiding the supply of the (details supplied) with buffer. [8725/23]

Photo of Eamon RyanEamon Ryan (Dublin Bay South, Green Party)
Link to this: Individually | In context | Oireachtas source

The Government has committed to significant funding of residential energy efficiency measures and investment in alternative heating sources which will reduce our reliance on fossil fuels and lower the cost of heating our homes. Budget 2023 has provided €348 million for SEAI residential and community energy upgrade schemes.

The Government, in February 2022, approved a package of supports to make it easier and more affordable for homeowners to undertake home energy upgrades for warmer, healthier and more comfortable homes with lower energy bills. Under the measures announced, the grant available for an air to water heat pump installations in houses increased from €3,500 to €6,500.

Heat pump systems are at their most efficient and effective when generating heat at a lower temperature. On this basis, one of the requirements for a dwelling to qualify for an SEAI grant for a heat pump system is that the dwelling has low heat loss. Some homes will already meet this requirement and other homes can achieve it through a package of upgrades. Grants are available for measures that can help a home achieve the required heat loss indicator, such as roof, wall and floor insulation, and window and door replacements.

The SEAI has advised grant aid is not available for component parts of the heat pump system, such as the item specified in the Deputy’s question, but rather the full heat pump system in its entirety, of which the cylinder and buffer tank could be component parts.

Furthermore, heat pumps supported through SEAI grant programmes are required to meet minimum heat pump product performance standards, be designed and sized correctly to meet the heat loads for that specific home, that the home meets minimum energy performance and they are designed and installed by competent installers or personnel.

To avail of a grant the heat pumps must meet the requirements specified in SEAI’s Domestic Technical Standards and Specifications which include:

- Meeting national requirements for domestic heating and building services and wiring regulations

- Fully comply with the EU Energy Label and Eco-design regulations

- Provide the data required for the Domestic BER assessment based on EN14825 and EN16147 testing standards

- Be CE marked and have the EC declaration of conformity

- Be listed on the SEAI Triple E register

- Satisfy the minimum Seasonal Performance Factor (Main Space Heating Efficiency) calculated according to the dwelling energy assessment procedure methodology

Heat pump systems must be installed by suitably qualified personnel. Personnel nominated to supervise and inspect the works, and to sign off the Declaration of Works must be competent in the different aspects of the works. This includes design, sizing and installation of the whole heat pump system. The minimum qualification and training requirements that must be met by personnel nominated to sign off the Declaration of Works for grant purposes are:

- Fetac/QQI Level 6 Advanced Craft in Plumbing, including a module on minor electrical works, or equivalent

- Certificate of competence from the specific manufacturer of the heat pumps installed, based on an adequate training programme

- Fetac/QQI Level 6 Heat Pump Systems (Course Code C30263) and supplemental Domestic Heat Pump Installation (Code 700606) or equivalent

A Registered Electrical Contractor (REC) is required to supervise and sign off the electrical installation of a heat pump system, in accordance with the definition of “Controlled Works and Restricted Works” by the CRU.

An F-Gas engineer is required to carry out and certify heat pump system installations involving refrigerant pipework and charging as per the F-Gas Regulation.

Full details of the grants and specifications are available here Air Source Heat Pump System Grants | Home Energy Grants | SEAI: eur03.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.seai.ie%2Fgrants%2Fhome-energy-grants%2Fheat-pump-systems%2F&data=05%7C01%7CTom.Halpin%40seai.ie%7Cac95727746334927693908db133b2398%7Cf664e346d6fb43e585ba8c0408102355%7C1%7C0%7C638124917331224121%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=vk1F%2Fbt1GbVXG%2BUvSgb65o%2Fdgt7pyWq476YNSO4c8Xc%3D&reserved=0.

Comments

No comments

Log in or join to post a public comment.